************ 1962 Berlin Tempelhof Airport Scenery  **************

by Mike Stevens (Rangerxlt1972@aol.com) and Juergen Seidel.


Version 1, 10/08, for FS2004 only.

NOTE: This file, AI traffic, and lots of classic airliners can be downloaded free 
from Tom Gibson's California Classics at - http://www.calclassic.com/ 

This scenery represents Berlin Tempelhof airport circa 1962.    

**** ABOUT THE AIRPORT ****

Tempelhof airport was a U.S. Air Force airbase located in the U.S. sector of occupied Berlin.  It was served mainly by MATS, Pan Am, BEA and various charters.  Lufthansa was forbidden to fly there until 1991.  To reach Tempelhof it was mandated to fly through the Berlin air corridors (see map jpeg) which were only 20 miles wide, with a minium altitude of 3000' and a maximum of 10,000'.  If you strayed out of these corridors, you could be shot down without warning, and indeed some aircraft were.  Templehof was ringed in by large apartment buildings on all sides, and it was the main focus of the famed 1948 to 1949 Berlin airlift.  The central runway was built in 1949 in anticipation of the continuation of the blockade, but since it was not needed after the blockade ended, it was allowed to deteriorate.! 

My vintage 1961 Tegel airport, located in the French sector of Berlin, is also available at www.avsim.com, as is a vintage Gatow airport, located in the British sector.  Gatow airport was created by Manfred Jahn, and an updated AFCAD for it to handle vintage AI traffic in the Gatow AFCAD folder in this zip archive. Please rename the original Gatow AFCAD first! Please be aware that new AI traffic scheduling providing an authentic mix of traffic for Berlin, as for all the world, is available at www.calclassic.com.

The other airport in Berlin (actually just outside of the city limits) is Berlin-Schoenefeld, in the Soviet sector.  It is available in my East Germany 1963 scenery at www.avsim.com.  Be sure to look for the wall and watchtowers at Brandenburg Gate.  Don't miss Leipzig, Dresden, and all the other East German airports in that scenery.

At Tempelhof, be sure to look for the vintage Berlin double-decker busses with authentic advertisements!


**** IMPORTANT NOTICE FOR THE USER, PLEASE READ  ****

YOU WILL NEED TO DOWNLOAD the following scenery libraries.  
Avsim is a good place to find them, and I am sure they are all on Flightsim too.  
If you don't download these library sceneries, then you will only get 
a bare bones airport, sorry. 


matts_trees4_broadleafs&conifers.zip by Matthew Tomkins
parking_ss.zip by Sidney Schwartz
ez-maint-platforms.zip by Chuck Ford
lights_ss_v2.zip by Sidney Schwartz
jirpe_trains_01_v2.zip by Petr Jiricek  (make sure this is the version two, the larger file)
lfobjlb1.zip by Lou Frost
peepslib.zip by Geoff Williams

available from AVSIM, flightsim.com, etc.


You need to download and install all Rwy12 Library files in order to get trees and 
other important objects.  
Again, AVSIM and Flightsim should have these, among many other sites. Make sure yours is up to date.

Set 1: rwy12_lib1_v1.2.zip
Set 2: rwy12_lib2_v1.2.zip
Set 3: rwy12_lib3_v1.2.zip

Typically, all the library BGL files from the files listed above are 
copied into the FS2004/Addon Scenery/Static Objects Library/scenery folder, 
while the BMP texture files are copied into the 
FS2004/Addon Scenery/Static Objects Library/texture folder.  
Add this as a Scenery Layer in the Scenery Library as described below, 
if you have not done this already.

Suggested Additions:

If you do not have another airport texture addon, I suggest that you 
download and install airland1.zip from AVSIM or elsewhere.  
It increases frame rates while adding detail to the concrete and asphalt aprons, 
taxiways, and runways.

AI propliner traffic matching this scenery is available 
separately from www.calclassic.com (AI Aircraft page).


Credits:

Airport surfaces created with AFCAD2, by Lee Swordy - 
thanks Lee!

This scenery uses Rwy12 and EZ-Scenery Object Libraries.  
Wonderful job, guys!

Light pylon object originally by Matthew Perry and Joshua 
Broadwater.  Check out their KBWI scenery!

Airstairs object originally by John MacKay, simplified for 
AI use by Tom Gibson. Thanks again!

Produced using SceneGenX by Tom Hiscox, Sbuilder by PTSim, 
GMAX by Discreet, ExcBuilder by Paavo Pihelgas, Ground2K4 by 
Christian Fumey, AND EZ-Scenery by Konstantin Kukushkin (Abacus).  
Thanks to all!


INSTALLATION

This EXE installer will NOT create a Start Menu entry, 
registry entry, uninstall program or anything else, 
other than copying the relevant files to the proper folders.  
You may install to a temporary folder by pressing the ... button 
and copying things by hand if you wish.

1.  Quit FS2004 if running.

2.  Double click this Tempelhof_1962.zip file archive.  
    You will find this text file and a file called SetupTempelhof_1962.exe.

3.  Double click the SetupTempelhof_1962.exe file to start the installation 
    (press the Run button at the warning screen.) 
    Follow the instructions to install.  
    If it doesn't find your FS2004 folder automatically, 
    press the ... button and browse to it.

    NOTE FOR NEXT STEPS:  If you have already installed some of the 
    CalClassic scenery packages, you may have at least some of the 
    required scenery layers installed.  If so, skip that step below.

4.  Copy the DCAfence_lm.bmp file in this zip archive to your Static Objects Library/texture 
    folder.  This will give the fences the correct appearance at night.

5.  OPTIONAL:  If you have Manfred Jahn's Gatow scenery installed, rename the AFCAD file found
    in the Gatow/scenery folder from AF2_EDUG60.bgl to AF2_EDUG60.bgl.orig.  Then copy the 
    AF2_EDUG60.bgl file found in the Gatow folder in this zip archive into the Gatow/scenery 
    folder.  This will provide updated taxiways and parking.

    I have included an alternate flatten file for the airport that might work better if you use
    default mesh.  If you want to try it, MOVE the gwyy8_A16N.bgl file from the Gatow/scenery 
    folder into the main Gatow folder (for safekeeping) and copy the edug_flatten_API.BGL found 
    in the Gatow folder of this zip archive into the Gatow/scenery folder.

6.  Start FS2004, and go to the Settings/Scenery Library choice on the 
    opening screen.  If you are currently flying, press Escape (Esc) and then End 
    Flight to get to this screen. Look at the top portion of the list.  
    If there is no Berlin Tempelhof 1962 area listed there, click on the Add Area button.  
    Double click the ADDON SCENERY folder.  
    Click the Berlin Tempelhof 1962 folder once.  
    Click OK.

7.  IMPORTANT. Make sure the "Germany Landclass" scenery layer if present is BELOW this 
    scenery layer, and  below the Gatow   scnery layer if present. Otherwise you will have wierdness.

8.  If you have any addon scenery for Berlin Tempelhof (jetways, etc.) uncheck that 
    scenery's Active box to inactivate it.

9.  Click OK.  Quit and restart FS.

10. If at the main screen, choose Create Flight at the left, 
    select desired items, and press Fly Now.  
    Choose Options/Settings/Display.  
    Under Scenery Objects set the Scenery Density to Dense or less 
    (setting to Very or Extremely Dense will display modern
    jetways at default airports).  
    Also, set the Autogen Density to Dense or less 
    (any higher may display telephone poles in odd places at the airports; 
    this will also simulate the less dense cities found in the era).  
    Click OK.

11. If you later want to fly in the modern era, just go into the Scenery Library 
    (Settings/Scenery Library) and click on the Enabled box next to the 
    Berlin Tempelhof entry until the red check mark is removed to deactivate the 
    1960's scenery (do not deactivate the Static Objects Library layer).  
    Reverse this process again to go back to the 1960's.

12.  Did you move the "Germany Landclass layer below this layer and below the Gatow Landclass layer?


NOTE: This file, AI Traffic for this scenery (and the world), and lots of classic 
airliners can be downloaded free from Tom Gibson's Classic Airliner web site at - 
http://www.calclassic.com

**************************************************************************
Now the legal stuff:

COPYRIGHT 2008 BY MIKE STEVENS and JUERGEN SEIDEL, ALL RIGHTS RESERVED

THIS SCENERY IS THE PROPERTY OF THE AUTHORS, AND CANNOT BE 
RE-SOLD OR PACKAGED WITH ANY PRODUCT FOR SALE, WITHOUT THE 
EXPRESS WRITTEN PERMISSION OF THE AUTHORS.  THIS IS FREEWARE!!

THIS FILE MAY NOT BE UPLOADED TO ANY OTHER SERVERS.  THIS FILE ARCHIVE 
MAY NOT BE UPLOADED TO SERVERS THAT CLAIM ANY COPYRIGHT ON THESE FILES 
STORED ON THAT SERVER.

THIS FILE ARCHIVE MAY NOT BE UPLOADED TO SERVERS THAT HAVE A CHARGE
FOR THEIR USE; IF A VIABLE FREE OPTION IS PROVIDED THIS FILE MAY BE
UPLOADED THERE.  THIS FILE ARCHIVE MUST NOT BE PLACED ON CD FOR SALE
OR ANY OTHER PUBLIC DISTRIBUTION WITHOUT OUR PERMISSION.

THIS FILE ARCHIVE MUST REMAIN INTACT; YOU MAY NOT REMOVE AND UPLOAD
PARTS OF THIS ARCHIVE.

THE AUTHORS ARE NOT LIABLE FOR ANY DAMAGE THAT YOU MIGHT 
INCUR AS A RESULT OF USING THESE PRODUCTS.  YOU ASSUME THE RISK 
OF USE.
